Description
These 1RU amplifiers are suitable for both standalone PA system use and as zone amplifiers in larger systems with local inputs. All models can operate on 240V AC or 24V DC for battery backup. They offer six source options on 2 inputs, including a 3-pin XLR with balanced mic or line level capabilities (adjusted via trimpot), and a dual RCA with adjustable sensitivity of 300mV or 1V. Additionally, input two features three sets of dual RCA sockets on the rear panel and a 3.5mm jack on the front panel, with source selection through a front panel switch. Input one can also be selected for VOX mute input two using DIP switches.
Phantom power is available for input one XLR, while front panel level controls are provided for inputs one and two. The circuit is equipped with protective features for potential output issues, including over voltage, over current, and over temperature situations. Once the fault is resolved, these protections will reset automatically. Amplifier status can be easily monitored at all times through the front panel LEDs.
Features
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- 3.5mm Jack Input (Front Mounted)
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
- Power Outputs
- Output: 60 watts RMS
- Distortion: < 0.5%, @ 1kHz
- Frequency Response
- Mic input: 50Hz - 12kHz, -3dB
- Line input: 50Hz - 15kHz, -3dB
- Sensitivity
- Mic input: 3mV-2V balanced
- Line input: 300mV-1V
- Aux inputs: 300mV - 1V
- 3.5mm input: 600mV
- Signal to noise ration
- Mic input: > 75dB below rated output
- Line input: > 81dB below rated output
- Output Connectors
- Speakers: Screw terminals (100V line)
- Input Connectors
- Inputs 1: 3 pin XLR balanced or 2 x RCA
- Input 2: 3 x RCA and 3.5mm Jack
- 24V DC power: Screw terminals
- 240V AC power: IEC power connector
- Size & Weight
- Dimensions: ≈ 483W x 210D x 44H
- Weight: ≈ 5.4kg
